Water Tank part 2

I needed several little metal loops for my water tank and I happened to be in a friends fishing store. I asked if he had any tiny swivels. He did, they were in the junk box, and after rummaging around for a few minutes I found these. 

The wire loops are a little large for HO but if I paint them black no one will notice. I cut each swivel in half and got two loops. I used five on the water tank so that leaves me about 30 more for other projects.

Here's my little water tank almost complete. It still needs weathering and I'll do that just before I place it in the scene. 

Fiddletown water tank

I needed a water tank that looked somewhat like the cartoon water tank in Carl Fallberg's Fiddletown & Copperopolis book. I didn't have a tank on hand but I did have some parts left over from an ancient project - a plastic water tank and roof. I think the parts are from Atlas. 

I used the cartoon as a guide to build the wooden supports and cribbing that hold the weight of the tank full of water. These were made from scrap wood and then spray painted with a Krylon Camo dark brown. The Camo colors dry dead flat and are great as a base color or primer for model builders.

The cartoon showed a shingled roof so the first step was to sand away the existing metal roof detail on the plastic roof and then shingle the roof. I used left-over scraps from Paper Creek and Wild West. They're slightly different colors so I washed the finished roof with a raw umber Apple Barrel acrylic color and then dry brushed with earth and then white. My goal was to blend the two different shingle colors into one homogeneous roof. 

The plastic tank was a brown color but I wanted it to be yellow. So I masked the roof and bottom timbers and airbrushed the tank a light yellow color. 

I'm almost finished with the spout detail and will post photos when done.

The village blacksmith

I found a box of Fine Scale Miniature castings I didn't know I had. So I went about painting them and adding several to this little Banta HO blacksmith shop. I had to scratchbuild the forge from a block of wood and some brick paper. I put a little LED in the forge to represent glowing coals. I had several painted tools left over from some long-ago and forgotten project so I added them in the corners. I should have added board ends and nail holes to the flooring - maybe next time.

For the exterior I colored the wood plank siding with some old Floquil Stains plus alcohol dye and India ink. The roof is Paper Creek printed tarpaper with the shadowing effect added using pastel chalks. 

The signs are from everywhere and they need more weathering to tone them down and make them look like they've been sitting in the sun for a decade. 

Most signs you find included with kits are way too big to look correct on a model - take the NOTICE sign on the front of the building. It would look much nicer at about half the size.

Building the wild west

These two western-style HO structures are going to be used on a new display I'm building. Both are Banta kits. Clark's on the top is just a barn-like structure with a false front. I added the plastic trim and roof supports to the front - these were salvaged from a structure I dropped. The two spaces between the trim will be covered with a sign.

The lower structure is a blacksmith shop. I'm going to add interior detail scavenged from several old FineScale Miniatures kits. The roofing tarpaper is from Paper Creek.

Old Paint

No "old paint" isn't the name of my horse, it's all the old bottles left over from other projects. Some go back to the days when model paint was actually affordable. 

You can see I opened the $1.69 bottle. The paint was still good so I used it on a project I was building. I mixed it with a little Roof Brown color to get a darker red. I thinned this with Diosol, the Floquil solvent, to make a stain. I broke the plastic inner seal that keeps the paint fresh. It was replaced with a small square of plastic cut from a sandwich bag.

I even found a bottle of Flo-Stain Driftwood, the elusive elixir used on a lot of FineScale Miniatures kits. The Driftwood was still good. I used one of the Micro Mark submersion mixers to get the stain back in usable condition.

Failed water

Here's a view of the diorama I scratchbuilt for the Model Railroad EXPO several years ago. The Mod Podge water in the rear under the arch was built on a scrap of Styrofoam. The foam is starting to outgas and is ruining the water. The water surface next to the building is okay because it was built on a square of plywood.

Here's an extreme example of failed water on an addition I helped build on an HO Pennsy layout. This is Woodland Scenic Realistic Water poured over a Styrofoam base. 

The foam base was painted with acrylic paints and then the water was poured on. In less then a month the bubbling started - small fizzy bubbles at first, and everyday there were more of them. Finally, after after about three months in looked like this - like the La Brea Tar Pits. 

From my experience I'd recommend not using any type of acrylic medium over a pink or blue Styrofoam base. I have not had problems using Gator Board.

The little bordello

I built this little one-room bordello from a kit made by Banta Models. I decided to decorate the second story bedroom with wallpaper, a rug, and some furniture left over from the days when I used to review such things for RMC. The furniture is from SS Ltd. - there's a bed, bookcase and a table. I added two HO figures looking out the front and back windows.

To see what's going on I placed a Evans Design pico LED to light things up. The LED is the size of a dot made by a pencil so it need some amplification. I glued a mirror to the underside of the roof to reflect the LED and increase the brightness. After all this is a bordello and you need a mirror on the ceiling!

I tested the LED. The roof is just set in place and the

trim, stairs and other details are not finished. I add a thin sheet of orange diazo film to the top part of the windows to warm-up the light.

Here's the finished bordello set along side several other structures that I've built in the past week or so.